Hover to zoom
INJ 2111-T DIN Rail Hi-PoE Injector with surge protection: 60 W Type 3 Hi-PoE compliant, 1 x RJ45 socket, 1 x screw terminal block, 10/100/1000 Mbps, IP20, potential separation, shield contacting with strain relief, shield current monitoring, expanded operating temperature range of -40C ... 75C.
The INJ 2111-T PoE Injector is a DIN Rail mounted single port, PoE mid-span injector. In environments vulnerable to voltage surges, it acts as an intermediary device between a non-PoE switch and a PoE device to inject fully compliant power over the Ethernet cable.
Generating up to 60 Watts, the INJ 1010 provides electrical power to remote PD access points, pan-tilt and zoom (PTZ) cameras and video-phones. It complies with the IEEE802.3bt Hi-PoE (60W of power) standard and is also backward compatible with IEEE802.3af/at.
With electrical isolation of the internal power supply, the INJ-2111-T is also protected against short circuits on the PoE side. The integrated surge protection increases system availability by protecting the connected end devices.
Through a Screw terminal bock, field wiring is easily connected to the PoE Injector and protected inside a covered wiring space. The cable shielding is connected quickly and easily, without tools, while simultaneously ensuring strain relief. This simplifies installation of the field cable and saves a great deal of time during installation.
Surge Protection: IEC 61643-21 (C2 - core/shield to ground 8/20?s 1kA/2kV)
For complete product details and technical specifications, please visit our INJ 2100-T PoE Injector Product Page.
Questions? Contact Perle Now for help.